Stool Mould Usage Method And Manufacturing Process

The method of using and maintaining Stool Mould is as follows:

Proper use: Before using the Stool Mould, it is necessary to check the condition of the Mould to ensure that there is no obvious damage or wear. When using, it is necessary to operate according to the instructions to avoid damage to the Mould caused by excessive force or improper use.

Regular cleaning: After using the Stool Mould, it needs to be cleaned and maintained regularly to ensure its normal work and prolong its life. When cleaning, you can use detergent and soft cloth to clean, and be careful not to use brushes or other hard objects to scratch the surface of the Mould.

Protects against oxidation: Stool Moulds are usually made of metal and are susceptible to oxidation. In order to prolong the service life of the Mould, you can apply a layer of protective oil or antirust agent after cleaning to avoid oxidation.

Proper storage: After using the Stool Mould, it needs to be properly stored in a dry and ventilated place to avoid being affected by humidity and high temperature. A layer of protective oil or anti-rust agent can be applied to protect the Mould during storage.

Regular Inspections: Check the condition of the Stool Mould regularly, especially before use, to ensure there is no visible damage or wear. If a problem is found, it should be repaired or replaced in time.

The general process of manufacturing Stool Mould includes the following steps:

Determine the product design and Mould structure: First, design the Mould structure according to the design and specification requirements of the stool to be produced, including the size of the Mould, the number and structure of the cavity on the Mould, and the material of the Mould.

Mould processing: The processing of Moulds requires precision CNC machine tools for processing. Firstly, the tool path is made according to the Mould design drawing, and then the Mould is processed by the CNC machine tool.

Assemble the Mould: Assemble the various parts of the Mould together, and carry out necessary debugging and running-in to ensure the normal operation of the Mould.

Trial mode: After the Mould manufacturing is completed, a trial mode is required to verify the design and manufacturing quality of the Mould. The same raw materials as the actual production need to be used during the Mould trial, and the dimensional accuracy, surface quality and other indicators of the product should be checked to ensure that the Mould can meet the production requirements.

Mould repair and maintenance: In long-term use, the Mould may be worn and damaged, and Mould repair and maintenance are required. Mould repair mainly includes repairing or replacing damaged parts, and maintenance mainly includes cleaning, rust prevention, lubrication and other maintenance work on the Mould.